Technical support is available from 8:00 a.m. to 5 p.m. CST
All other times, call: 800.890.8989 or 512.836.2242
Updated: November, 2007
Product: SHOWGUN automated luminaire
Subject: Potential Gobo cracking from blower failure
There is harness connection between HD1 on the Front Panel LED Board and HD8 on the Tilt board. This connection affects both the Status and Lamp LEDs on the front panel and the temperature sensors for the Lamp Blowers.
Check this connection if you see that the Status and the Lamp LEDs are both off.
If this connector is
not attached, the temperature sensor won't detect an overheating inside
the head that could crack the gobos.
